ZyXEL Communications P-2302HWL-P1, Руководство по выпуску прошивки

Страница: 30 / 36

ZyXEL Confidential
360AJB0C1.rtf 30/36
t38HsRedun <index><0~3> setup T.38 high speed redundancy
t38LsRedun <index><0~8> setup T.38 low speed redundancy
t38T30Ecm <index><0:disable|1:enable> enable\disable T.39 ECM
t38MaxRate <index><rate> set T.38 data transmission rate
dsp
index <index> Select DSP index.
echocancellation <index> <enable|disable> Disable or enable the echo cancellation
jittersize <index> <0~90>ms Change the jitter buffer size for DSP
start <index> <loop|ground> Change the pots type.
vad <index> <enable|disable> Disable or enable the VAD
dialtype <index> <pstn|tone|pulse> Change the dialing type
dialtonetype <index> <ntt:pdt> Change the dial tone type
dialshortinterval <index> <0~256 sec> Change the short dialing interval . If the digital
interval is smaller than dialshortinterval , the device
will call the phone number, No matter whether you
have pressing finishing or not
diallonginterval <index> <0~256 sec> Change the long dialing interval , if the first digital
time over diallonginterval
The device will send busy tone
flashmaxinterval <index> <0~65535 msec> Setup flash key max interval, If press flash key
interval < fxoflashmax
,device will neglect the flash key and hang up.
flashmininterval <index> <0~65535 msec> Setup flash key min interval. If press flash key
interval < flashmininterval
,device will neglect the flash key.
inputvolume <index> <-14~14> Change the input volume gain
outputvolume <index> <-14~14> Change the output volume gain
receivetonetype <index> <ir|sir> Change the receive tone type.
sipselect <index><phone
port|0:All><0:No|1:Yes> >
Select SIP index and Disable or enable the SIP
callwaitingtime <index> <0~128 sec> Setup call waiting time
cidtype <index><0:During Ring |1: Prior Ring> Call ID display
moment
cidpayload <index><0:FSK|1:DTMF> Setup DTMF payload type
cidfskstartinterval <index> <0~65535 msec> Setup FSK start interval. This commands actually
generate extra 200ms delay.
ex: set to 0 ms -> 200ms
set to 200ms -> 400 ms
ciddtmfstartinterval <index> <0~65535 msec> Setup DTMF start interval. This commands actually
generate extra 200ms delay.
ex: set to 0 ms -> 200ms
set to 200ms -> 400 ms
cidringtimeout <index> <0~65535 msec> Setup call id ring time out. This commands actually
generate extra 200ms delay.
ex: set to 0 ms -> 200ms
set to 200ms -> 400 ms
featuresenable <index> <0~7> ON/OFF feature
save <index> Save the configured value
display <index> Display the configured value.
dumpCfg Display working buffer value.
free Free working buffer.
phbook
index <index> Select phone book index.
active <index> <1:active|0:inactive> Active/in-active this setting.
orignum <index> <0~32 digits> Setup phone number for this index of phone book.