ZyXEL Communications P-202H Plus v2, Поддержка заметок

Страница: 96 / 434

P-202H Plus v2 Support Notes
3. Call Transfer
4. Call Forwarding
5. Reminder Ring
6. Terminal Portability(Suspend/Resume)
7. MSN/subaddress
Most supplementary services are not free, please check with your telephone
company for the services they offer.
How do I do call waiting/call hold/call retrieve?
•
Put your current call on hold and answer the incoming call - after hearing
the call waiting tone, press and immediately release the
Flash button on
your telephone.
•
Put your current call on hold and switch to another call - press and
immediately release the
Flash button on your telephone.
•
Hang up your current call before answering the incoming call - hang up
the phone and wait for answering the incoming call.
•
Hang up the current active call and switch back to the other call - hang up
and wait for the phone to ring. Then pick up the phone to return to the
other call.
Why doesn't call waiting work as expected?
An incoming caller will receive a busy signal if:
•
You have two calls active (one active and one on hold; or both active by
using Three-Way Calling).
•
You are dialing a number on the B channel the incoming caller is
attempting to reach, but have not yet established a connection.
If no action is taken to answer the call (call waiting indicator tone is ignored), the
call waiting tones will disappear after about 20 seconds.
How do I do three way calling?
•
Press the Flash key to put the existing call on hold and receive a dial tone.
•
Dial the third party's phone number.
•
When you are ready to conference the call together, press the Flash key
again to establish a three way conference call.
How do I remove a party from the three-way calling?
Simply press the Flash key. The last call that was added to the conference is
dropped.
All contents copyright © 2006 ZyXEL Communications Corporation.
96