ZyXEL Communications P-202H Plus v2, Поддержка заметок

Страница: 89 / 434

P-202H Plus v2 Support Notes
2. Edit the file /etc/syslog.conf by adding the following line at the end of the
/etc/syslog.conf file.
local1.* /var/log/zyxel.log
Where /var/log/zyxel.log is the full path of the log file.
3. Restart syslogd.
•
ZyXEL Syslog Message Format
P-202H Plus v2 sends 5 types of syslog messages to syslogd, they are:
1. CDR log
2. Packet Triggered log
3. Filter log
4. PPP log
5. POTS log
CDR
Call Detail Record (CDR) logs all data phone line activity if set to
Yes .
Packet
triggered
The first 48 bytes or octets and protocol type of the triggering
packet is sent to the UNIX syslog server when this field is set to
Yes .
Filter log
No filters are logged when this field is set to No . Filters with the
individual filter Log field set to Yes are logged when this field is
set to
Yes .
PPP log PPP events are logged when this field is set to Yes .
POTS log Voice calls are logged when this field is set to Yes .
1. CDR log (call messages)
Format:
sdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );
String = board xx line xx channel xx, call xx, str
board = the hardware board ID
line = the WAN ID in a board
channel = channel ID within the WAN
call = the call reference number which starts from 1 and increments by 1 for each
new call
str = C01 Outgoing Call dev xx ch xx (dev:device No. ch:channel No.)
C01 Incoming Call xxxxBps xxxxx (L2TP,xxxxx means Remote Call ID)
All contents copyright © 2006 ZyXEL Communications Corporation.
89