Chapter 7 Setup Wizard
NWA50AX/NWA90AX/NWA55AXE Series User’s Guide
54
7.2.4 Step 4 SSID
Use this screen to enable, disable or edit an SSID profile.
Select an SSID profile and click the
Status
switch to turn it on or off. To change an SSID profile’s settings,
such as the SSID (WiFi network name) and WiFi password, double-click the SSID profile entry from the list.
See
for more information.
Note: You cannot add or remove an SSID profile after running the setup wizard.
Figure 33
Wizard: SSID
7.2.4.1 Edit SSID Profile
Use this screen to configure an SSID profile.
The screen varies depending on the security type you selected.
•
SSID
: Enter a descriptive name of up to 32 printable characters for the wireless LAN.
•
VLAN ID
: Enter a VLAN ID for the Zyxel Device to use to tag traffic originating from this SSID.
Band Mode
: Select the wireless band which this profile should use. 2.4 GHz is the frequency used by
IEEE 802.11b/g/n wireless clients. 5 GHz is the frequency used by IEEE 802.11ac/a/n wireless clients.
•
Security Type
: Select
WPA2
to add security on this wireless network. Otherwise, select
OPEN
to allow
any wireless client to associate this network without authentication.
•
Personal
: If you set
Security Type
to
WPA2
and select
Personal
, enter a pre-shared key of between 8
and 63 case-sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal
characters.
Note: For Zyxel Device models that support enterprise security mode:
You can select the
Enterprise
mode in
Configuration > Object > AP Profile > SSID >
Security List > Edit
.
Click
OK
to proceed. Click
Cancel
to close the screen without saving.
Содержание NWA50AX
Страница 42: ...42 PART I Standalone Configuration...
Страница 195: ...195 PART II Local Configuration in Cloud Mode...
Страница 207: ...207 PART III Appendices and Troubleshooting...