Chapter 10 Wireless
NWA50AX/NWA90AX/NWA55AXE Series User’s Guide
80
Figure 55
Configuration > Wireless > AP Management > Setup Wireless Bridge Vlan ID: Wireless Bridge
Vlan Setting (NWA55AXE)
Each field is described in the following table.
Table 28 Configuration > Wireless > AP Management
LABEL
DESCRIPTION
Radio 1 Setting
Radio 1 Activate
Select the check box to enable the Zyxel Device’s first (default) radio.
Radio 1 OP Mode
Select the operating mode for radio 1.
AP Mode
means the radio can receive connections from wireless clients and pass their data
traffic through to the Zyxel Device to be managed (or subsequently passed on to an
upstream gateway for managing).
Root AP
means the radio acts as an AP and also supports the wireless connections with
other APs (in repeater mode) to form a WDS (Wireless Distribution System) to extend its
wireless network.
Repeater
means the radio can establish a wireless connection with other APs (in either root
AP or repeater mode) to form a WDS.
Radio 1 Profile
Select the radio profile the radio uses.
Note: You can only apply a 2.4G AP radio profile to radio 1. Otherwise, the first
radio will not be working.
Radio 1 WDS Profile
This field is available only when the radio is in
Root AP
or
Repeater
mode.
Select the WDS profile the radio uses to connect to a root AP or repeater.
Enable WDS Wireless
Bridging
If you set the Zyxel Device as a root AP, the radio that’s bridging with the Zyxel Device
should be in repeater mode.
Be careful to avoid bridge loops. For example, if your root AP and the Zyxel Device are
connected to a switch, and they’re also connected to each other using a WiFi connection.
This will create bridge loops.
This field is available only when the radio is in
Repeater
mode. Select this to enable WDS
wireless bridging on the Zyxel Device. See
for more information
on
Wireless Distribution System (WDS).
Содержание NWA50AX
Страница 42: ...42 PART I Standalone Configuration...
Страница 195: ...195 PART II Local Configuration in Cloud Mode...
Страница 207: ...207 PART III Appendices and Troubleshooting...