NWA50AX/NWA90AX/NWA55AXE Series User’s Guide
208
C
HAPTER
25
Troubleshooting
25.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The potential problems are
divided into the following categories.
•
Power, Hardware Connections, and LED
•
Zyxel Device Management, Access, and Login
•
•
•
25.2 Power, Hardware Connections, and LED
The Zyxel Device does not turn on. The LED is not on.
1
Make sure you are using the power adapter included with the Zyxel Device or a PoE power injector/
switch.
2
Make sure the power adapter or PoE power injector/switch is connected to the Zyxel Device and
plugged in to an appropriate power source. Make sure the power source is turned on.
3
Disconnect and re-connect the power adapter or PoE power injector/switch.
4
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
5
If none of these steps work, you may have faulty hardware and should contact your Zyxel Device
vendor.
The LED does not behave as expected.
1
Make sure you understand the normal behavior of the LED. See
2
Check the hardware connections. See the Quick Start Guide.
3
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
Содержание NWA50AX
Страница 42: ...42 PART I Standalone Configuration...
Страница 195: ...195 PART II Local Configuration in Cloud Mode...
Страница 207: ...207 PART III Appendices and Troubleshooting...