manualshive.com logo in svg

ZyXEL Communications NWA1000 Series, Руководство пользователя, Страница: 32 / 263

Поделиться
Скачать
ZyXEL Communications NWA1000 Series Скачать руководство пользователя страница 32

Chapter 4 Standalone Mode

NWA1000 Series User’s Guide

32

File Transfer Protocol (FTP)

This protocol can be used for firmware upgrades and configuration backup and restore.

Simple Network Management Protocol (SNMP)

The NWA1000 Series can be monitored by an SNMP manager. See the SNMP chapter in this User’s 
Guide.

4.3  Good Habits for Managing the NWA1000 Series

Do the following things regularly to make the NWA1000 Series more secure and to manage it more 
effectively.

• Change the password often. Use a password that’s not easy to guess and that consists of different 

types of characters, such as numbers and letters.

• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it). Restoring an earlier working 

configuration may be useful if the device becomes unstable or even crashes. If you forget your 
password, you will have to reset the NWA1000 Series to its factory default settings. If you backed up 

an earlier configuration file, you won’t have to totally re-configure the NWA1000 Series; you can 

simply restore your last configuration.

  

4.4  Starting and Stopping the NWA1000 Series

Here are some of the ways to start and stop the NWA1000 Series.

Always use Maintenance > Shutdown or the 

shutdown 

command 

before you turn off the NWA1000 Series or remove the power. Not doing 

so can cause the firmware to become corrupt. 

Table 10   Starting and Stopping the NWA1000 Series

METHOD

DESCRIPTION

Turning on the power

A cold start occurs when you turn on the power to the NWA1000 Series. The NWA1000 
Series powers up, checks the hardware, and starts the system processes.

Rebooting the 
NWA1000 Series

A warm start (without powering down and powering up again) occurs when you use the 

Reboot

 button in the 

Reboot

 screen or when you use the 

reboot

 command. The 

NWA1000 Series writes all cached data to the local storage, stops the system processes, 
and then does a warm start. 

Using the RESET button

If you press the 

RESET

 button on the back of the NWA1000 Series, the NWA1000 Series sets 

the configuration to its default values and then reboots. See 

Section 27.6 on page 210

 for 

more information.

Содержание NWA1000 Series








































































































































































































































































Отзывы:

Нет отзывов