Chapter 12 AP Profile
NWA1000 Series User’s Guide
102
Profile Name
Enter up to 31 alphanumeric characters to be used as this profile’s name. Spaces and
underscores are allowed.
802.11 Band
Select the wireless band which this radio profile should use. Not all NWA1000 Seriess support
both 2.4 GHz and 5 GHz frequency bands.
2.4 GHz is the frequency used by IEEE 802.11b/g/n wireless clients.
5 GHz is the frequency used by IEEE 802.11ac/a/n wireless clients.
•
11b/g
: allows either IEEE 802.11b or IEEE 802.11g compliant WLAN devices to associate
with the NWA1000 Series. The NWA1000 Series adjusts the transmission rate
automatically according to the wireless standard supported by the wireless devices.
•
11b/g/n
: allows IEEE802.11b, IEEE802.11g and IEEE802.11n compliant WLAN devices to
associate with the NWA1000 Series. The transmission rate of your NWA1000 Series might
be reduced.
•
11a
: allows only IEEE 802.11a compliant WLAN devices to associate with the NWA1000
Series.
•
11a/n
: allows both IEEE802.11n and IEEE802.11a compliant WLAN devices to associate
with the NWA1000 Series. The transmission rate of your NWA1000 Series might be
reduced.
•
11ac
: allows IEEE 802.11ac compliant WLAN devices to associate with the NWA1000
Series.
Channel Width
Select the channel bandwidth you want to use for your wireless network.
Select
20 MHz
if you want to lessen radio interference with other wireless devices in your
neighborhood.
Select
20/40 MHz
to allow the NWA1000 Series to choose the channel bandwidth (20 or 40
MHz) that has least interference.
Select
20/40/80 MHz
to allow the NWA1000 Series to choose the channel bandwidth (20 or
40 or 80 MHz) that has least interference. This option is available only when you select
11ac
in the
802.11 Band
field.
Channel
Selection
This is the radio channel which the signal will use for broadcasting by this radio profile.
•
DCS
: Choose Dynamic Channel Selection to have the NWA1000 Series choose a radio
channel that has least interference.
•
Manual
: Choose from the available radio channels in the list. If your NWA1000 Series is
outdoor type, be sure to choose non-indoors channels.
Enable DCS
Client Aware
Select this to have the NWA1000 Series switch channels only when there are no clients
connected to it. If there is a client connected, the NWA1000 Series will not switch channels
but generate a log. The NWA1000 Series tries to scan and switch channels again at the end
of the specified time interval or at the scheduled time.
If you disable this then the NWA1000 Series switches channels immediately regardless of
any client connections. In this instance, clients that are connected to the NWA1000 Series
when it switches channels are dropped.
2.4 GHz Channel
Selection Method
Select how you want to specify the channels the NWA1000 Series switches between for 2.4
GHz operation. This field appears only when you choose 802.11b/g/n mode.
Select
auto
to have the NWA1000 Series display a
2.4 GHz Channel Deployment
field you
can use to limit channel switching to 3 or 4 channels.
Select
manual
to select the individual channels the NWA1000 Series switches between.
Note: The method is automatically set to
auto
when no channel is selected or
any one of the previously selected channels is not supported.
Channel ID
This field is available only when you set
Channel Selection
to
DCS
and set
2.4 GHz Channel
Selection Method
to
manual
.
Select the channels that you want the NWA1000 Series to use.
Table 44 Configuration > Object > AP Profile > Add/Edit Profile (continued)
LABEL
DESCRIPTION
Содержание NWA1000 Series
Страница 15: ...Chapter 1 Introduction NWA1000 Series User s Guide 15 Figure 2 Dual Radio Application ...
Страница 30: ...30 PART I Standalone Configuration ...
Страница 126: ...Chapter 14 Certificates NWA1000 Series User s Guide 126 Figure 78 Configuration Object Certificate My Certificates Edit ...
Страница 190: ...190 PART II Local Management in Cloud Mode ...