ZyXEL Communications NWA-1100, Руководство пользователя

Страница: 59 / 225

Chapter 6 Wireless Settings Screen
ZyXEL NWA-1100 User’s Guide
59
SSID The SSID (Service Set IDentifier) identifies the Service Set with which a
wireless station is associated. Wireless stations associating to the access
point (AP) must have the same SSID. Select an
SSID Profile from the
drop-down list box.
Note: If you are configuring the ZyXEL Device from a computer
connected to the wireless LAN and you change the ZyXEL
Device’s SSID or security settings, you will lose your wireless
connection when you press
Apply to confirm. You must then
change the wireless settings of your computer to match the
ZyXEL Device’s new settings.
Hide SSID If you hide the SSID, then the ZyXEL Device cannot be seen when a
wireless client scans for local APs. The trade-off for the extra security of
“hiding” the ZyXEL Device may be inconvenience for some valid WLAN
clients.
Channel Set the operating frequency/channel depending on your particular
region.
To manually set the ZyXEL Device to use a channel, select a channel from
the drop-down list box. Click
MAINTENANCE and then the Channel
Usage tab to open the Channel Usage screen to make sure the channel
is not already used by another AP or independent peer-to-peer wireless
network.
To have the ZyXEL Device automatically select a channel, click Scan
instead.
Wireless Mode Select 802.11b Only to allow only IEEE 802.11b compliant WLAN
devices to associate with the ZyXEL Device.
Select 802.11g Only to allow only IEEE 802.11g compliant WLAN
devices to associate with the ZyXEL Device.
Select 802.11b+g to allow both IEEE802.11b and IEEE802.11g
compliant WLAN devices to associate with the ZyXEL Device. The
transmission rate of your ZyXEL Device might be reduced.
Advanced Settings
Beacon
Interval
When a wirelessly networked device sends a beacon, it includes with it a
beacon
interval. This specifies the time period before the device sends the
beacon again.
The interval tells receiving devices on the network how long they can
wait in lowpower mode before waking up to handle the beacon. This
value can be set from
20ms to 1000ms. A high value helps save current consumption of the
access point.
Intra-BSS
Traffic When Intra-BSS is enabled, wireless client can access the wired network
and communicate with each other. When Intra-BSS is disabled, wireless
client can still access the wired network but cannot communicate with
each other.
Table 9 Wireless: Access Point
LABEL DESCRIPTION