Chapter 12 Maintenance
NR2101 User’s Guide
99
Figure 100
About
The following table describes the labels in this screen.
Note: If you uploaded the default configuration file you may need to change the IP address
of your computer to be in the same subnet as that of the default NR2101 IP address
(192.168.225.1).
12.5 Factory Reset
Use this screen to reset the NR2101 to the factory default mode. Click
FACTORY RESET
, and the following
pop-up window appears. Click
OK
to reboot the NR2101. This allows you to reboot the NR2101 without
turning the power off. Wait a few minutes until the login screen appears. If the login screen does not
appear, enter the default IP address (192.168.225.1)of the NR2101 in your web browser.
Table 43 About
LABEL
DESCRIPTION
Zyxel Firmware
version
Use this screen to view the current firmware version of the NR2101.
Software version
Use this screen to view the current software version of the NR2101.
MiFi Software
version
Use this screen to view the current MiFi software version of the NR2101.
Open Source
Notices
Click this to see the open source notices of the NR2101.