
NAP Series User’s Guide
6
C
HAPTER
1
Introduction
1.1 Overview
This User’s Guide covers the following models: NAP102, NAP203, NAP303 and NAP353. Your NAP is a
wireless AP (Access Point). It extends the range of your existing wired network without additional wiring,
providing easy network access to mobile users.
The NAP is managed and provisioned by the NCC (Nebula Control Center) automatically when it is
connected to the Internet. If you need to change the NAP’s VLAN setting or manually set its IP address,
access its built-in web-based configuration tool. You can check the NCC's
AP > Monitor > Access Point
screen or the connected gateway for the NAP's current LAN IP address. Alternatively, disconnect the
gateway or disable its DHCP server function and use the NAP's default static LAN IP address
(192.168.1.2).
1.1.1 Dual-Radio
The NAP is equipped with dual wireless radios. This means you can configure two different wireless
networks to operate simultaneously.
Note: A different channel should be configured for each WLAN interface to reduce the
effects of radio interference.
http://192.168.1.2
http://nebula.zyxel.com
http://(DHCP-assigned IP)