Chapter 7 Home Networking
LTE7461-M602 User’s Guide
68
The following table describes the fields in this screen.
Table 22 Network Setting > Home Networking > LAN Setup
LABEL
DESCRIPTION
Interface Group
This displays the name of the group that your Zyxel Device belongs to.
Group Name
LAN IP Setup
Enter the LAN IP address you want to assign to your Zyxel Device in dotted decimal notation,
IP Address
for example, 192.168.1.1 (factory default).
Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0
Subnet Mask
(factory default). Your Zyxel Device automatically computes the subnet mask based on the
IP address you enter, so do not change this field unless you are instructed to do so.
DHCP Server State
Select
DHCP
Enable
to have your Zyxel Device assign IP addresses, an IP default gateway and DNS
servers to LAN computers and other devices that are DHCP clients.
If you select
Disable
, you need to manually configure the IP addresses of the computers and
other devices on your LAN.
If you select
DHCP Relay
, the Zyxel Device acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the clients.
When DHCP is used, the following fields need to be set:
IP Addressing Values
Beginning IP
Address
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the last of the contiguous addresses in the IP address pool.
Ending IP Address
Auto reserve IP for
the same host
Enable this if you want to reserve the IP address for the same host.
DHCP Server Lease Time
DHCP server leases an address to a new device for a period of time, called the DHCP lease
Days/Hours/Minutes
time. When the lease expires, the DHCP server might assign the IP address to a different
device.
DNS Values
The Zyxel Device supports DNS proxy by default. The Zyxel Device sends out its own LAN IP
DNS
address to the DHCP clients as the first DNS server address. DHCP clients use this first DNS
server to send domain-name queries to the Zyxel Device. The Zyxel Device sends a response
directly if it has a record of the domain-name to IP address mapping. If it does not, the Zyxel
Device queries an outside DNS server and relays the response to the DHCP client.
Select
From ISP
if your ISP dynamically assigns DNS server information (and the Zyxel Device's
WAN IP address).
Select
Static
if you have the IP address of a DNS server. Enter the DNS server's IP address in
the field to the right.
Select
DNS Proxy
to have the DHCP clients use the Zyxel Device’s own LAN IP address. The
Zyxel Device works as a DNS relay.
LAN IPv6 Mode Setup
Use this field to
IPv6 Active
Enable
or
Disable
IPv6 activation on the Zyxel Device.
When IPv6 activation is used, the following fields need to be set:
