ZyXEL Communications IPC-3605N, Руководство пользователя

Страница: 4 / 91

Important Notices
Regulatory Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and the receiver

Connect the equipment to an outlet on a different circuit than the receiver is connected.

Consult the dealer or an experienced TV/radio technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
Operation Safety
Before using this camera, please read and follow the steps below to protect your IP camera.

Please place the IP camera on a level surface and keep it out of direct sunlight

Keep the IP camera indoors and away from water, dust, humidity, and magnetic products

Do not rotate your IP camera by hand. It may cause damage to the camera.

Do not drop the IP camera, this may damage the mechanical parts of the camera.

Do not disassemble or remodel the product, it can cause damage or fire.

Do not shake, move, or disturb the camera when it is in operation, as such actions may result in
the malfunction of the device.

Power the camera off if it produces smoke or unusual odor.

Do not place the IP camera around heat sources such as a Television or microwave oven.