ZyXEL Communications IES-1248-71, Руководство пользователя

Страница: 398 / 464

Chapter 56 Virtual Channel Management
IES-1248-71/73 User’s Guide
398
This command allows the configuration of a PVC (permanent virtual circuit) for one or a
range of ADSL ports.
The following example sets a PVC on ADSL port 1 with VPI 1, VCI 34, default VID 100
priority 3. It sets the “platinum” profile for downstream traffic shaping and a VC profile
named “plus” for upstream traffic policing.
56.3.3 PVC Delete Command
Syntax:
ras> adsl pvc delete <portlist> <vpi> <vci>
where
This command deletes the specified PVC channel.
<vci> =
The VCI setting can be 32 to 65535 if the vpi is 0 or 1 to 65535
if the vpi is not 0.
<super |vid =
Enable the super channel option to allow a channel forward
frames belonging to multiple VLAN groups (that are not
assigned to other channels). The IES-1248 forwards frames
belonging to VLAN groups that are not assigned to specific
channels to the super channel. The super channel functions in
the same way as the channel in a single channel environment.
One port can have only one super channel.
The default VID (1 to 4094). Each PVC must have a unique
VID since the IES-1248 forwards traffic back to the subscribers
based on the VLAN ID.
You must assign a default VID (1 to 4094) and IEEE 802.1p
default priority (0 to 7) to normal channels. Each PVC must
have a unique VID (since the IES-1248 forwards traffic back to
the subscribers based on the VLAN ID).
<priority> =
This is the priority value (0 to 7) to add to incoming frames
without a (IEEE 802.1p) priority tag.
DS vcprofile =
Assign a VC profile to use for this channel’s downstream traffic
shaping.
[,US
vcprofile]> =
Assign a VC profile to use for policing this channel’s upstream
traffic. The IES-1248 does not perform upstream traffic policing
if you do not specify an upstream VC profile.
Figure 267 PVC Set Command Example
ras> adsl pvc set 1 1 34 100 3 platinum,plus
<portlist> =
You can specify a single ADSL port <1>, all ADSL ports <*> or
a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
[<vpi> <vci>] =
The VPI and VCI of an individual PVC.