ZyXEL Communications GS1510-16 -, Руководство пользователя

Страница: 98 / 204

Chapter 17 Spanning Tree Protocol
GS1510 Series User’s Guide
98
17.5 STP Status Screen
Use this screen to check the current status of the STP feature. Click Advanced
Settings > STP > STP Status to display the screen as shown.
Figure 53 STP Status
The following table describes the labels in this screen.
Priority Priority is used in determining the root switch, root port and designated
port. The switch with the highest priority (lowest numeric value)
becomes the STP root switch. If all switches have the same priority, the
switch with the lowest MAC address will then become the root switch.
Enter a value from 0~61440.
The lower the numeric value you assign, the higher the priority for this
bridge.
Priority determines the root bridge, which in turn determines the Root
Hello Time, Root Maximum Age and Root Forwarding Delay.
Pathcost Path cost is the cost of transmitting a frame on to a LAN through that
port. It is recommended to assign this value according to the speed of
the bridge. The slower the media, the higher the cost.
Apply Click Apply to save your changes.
Refresh Click Refresh to begin configuring this screen afresh.
Table 28 General Settings (continued)
LABEL DESCRIPTION
Table 29 STP Status
LABEL DESCRIPTION
Current Root Status
MAC Address
This is the MAC address of the root bridge.
Priority Root refers to the base of the spanning tree (the root bridge). This
field displays the root bridge’s priority. This Switch may also be the root
bridge.
Max Age This is the maximum time (in seconds) the Switch can wait without
receiving a configuration message before attempting to reconfigure.