ZyXEL Communications GS1510-16 -, Руководство пользователя

Страница: 173 / 204

Appendix B IP Addresses and Subnetting
GS1510 Series User’s Guide
173
Configuring IP Addresses
Where you obtain your network number depends on your particular situation. If
the ISP or your network administrator assigns you a block of registered IP
addresses, follow their instructions in selecting the IP addresses and the subnet
mask.
If the ISP did not explicitly give you an IP network number, then most likely you
have a single user account and the ISP will assign you a dynamic IP address when
the connection is established. If this is the case, it is recommended that you select
a network number from 192.168.0.0 to 192.168.255.0. The Internet Assigned
Number Authority (IANA) reserved this block of addresses specifically for private
use; please do not use any other number unless you are told otherwise. You must
also enable Network Address Translation (NAT) on the Switch.
Once you have decided on the network number, pick an IP address for your Switch
that is easy to remember (for instance, 192.168.1.1) but make sure that no other
device on your network is using that IP address.
The subnet mask specifies the network number portion of an IP address. Your
Switch will compute the subnet mask automatically based on the IP address that
you entered. You don't need to change the subnet mask computed by the Switch
unless you are instructed to do otherwise.
3 255.255.224.0 (/19) 8 8190
4 255.255.240.0 (/20) 16 4094
5 255.255.248.0 (/21) 32 2046
6 255.255.252.0 (/22) 64 1022
7 255.255.254.0 (/23) 128 510
8 255.255.255.0 (/24) 256 254
9 255.255.255.128 (/25) 512 126
10 255.255.255.192 (/26) 1024 62
11 255.255.255.224 (/27) 2048 30
12 255.255.255.240 (/28) 4096 14
13 255.255.255.248 (/29) 8192 6
14 255.255.255.252 (/30) 16384 2
15 255.255.255.254 (/31) 32768 1
Table 64 16-bit Network Number Subnet Planning (continued)
NO. “BORROWED”
HOST BITS
SUBNET MASK NO. SUBNETS NO. HOSTS PER
SUBNET