ZyXEL Communications GS-2750 Скачать руководство пользователя страница 170

Страница: 170 / 336

Chapter 22 Multicast

GS-2750 User’s Guide

170

Unknown

Multicast Frame

Specify the action to perform when the Switch receives an unknown multicast

frame. Select

Drop

to discard the frame(s). Select

Flooding

to send the frame(s)

to all ports.

Reserved

Multicast Group

Multicast addresses (224.0.0.0 to 224.0.0.255) are reserved for the local scope.

For examples, 224.0.0.1 is for all hosts in this subnet, 224.0.0.2 is for all multicast

routers in this subnet, etc. A router will not forward a packet with the destination IP

address within this range. See the IANA website for more information.
Specify the action to perform when the Switch receives a frame with a reserved

multicast address. Select

Drop

to discard the frame(s). Select

Flooding

to send

the frame(s) to all ports.

Port

This field displays the port number.

Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use

this row first to set the common settings and then make adjustments on a port-by-

port basis.

Note: Changes in this row are copied to all the ports as soon as

you make them.

Immed. Leave

Select this option to set the Switch to remove this port from the multicast tree

when an IGMP version 2 leave message is received on this port.
Select this option if there is only one host connected to this port.

Group Limited

Select this option to limit the number of multicast groups this port is allowed to join.

Max Group Num.

Enter the number of multicast groups this port is allowed to join. Once a port is

registered in the specified number of multicast groups, any new IGMP join report

frame(s) is dropped on this port.

IGMP Filtering

Profile

Select the name of the IGMP filtering profile to use for this port. Otherwise, select

Default

to prohibit the port from joining any multicast group.

You can create IGMP filtering profiles in the

Multicast

Multicast Setting

IGMP Filtering Profile

screen.

IGMP Querier

Mode

The Switch treats an IGMP query port as being connected to an IGMP multicast

router (or server). The Switch forwards IGMP join or leave packets to an IGMP

query port.
Select

Auto

to have the Switch use the port as an IGMP query port if the port

receives IGMP query packets.
Select

Fixed

to have the Switch always use the port as an IGMP query port.

Select this when you connect an IGMP multicast server to the port.
Select

Edge

to stop the Switch from using the port as an IGMP query port. The

Switch will not keep any record of an IGMP router being connected to this port.

The Switch does not forward IGMP join or leave packets to this port.

Apply

Click

Apply

to save your changes to the Switch’s run-time memory. The Switch

loses these changes if it is turned off or loses power, so use the

Save

link on the

top navigation panel to save your changes to the non-volatile memory when you

are done configuring.

Cancel

Click

Cancel

to begin configuring this screen afresh.

Table 55

Advanced Application > Multicast > Multicast Setting (continued)

LABEL

DESCRIPTION

Содержание GS-2750

















































































































































































































































































































































Результаты поиска

Содержание GS-2750

Отзывы:

Похожие инструкции для GS-2750

Бренды по названию

Популярные бренды

ZyXEL Communications GS-2750, Руководство пользователя

Результаты поиска

Содержание GS-2750

Отзывы:

Похожие инструкции для GS-2750

Бренды по названию

Популярные бренды