manualshive.com logo in svg

ZyXEL Communications GS-2724, Руководство пользователя, Страница: 333 / 348

Поделиться
Скачать
ZyXEL Communications GS-2724 Скачать руководство пользователя страница 333

GS-2724 User’s Guide

333

A

P P E N D I X

  

F 

Legal Information

Copyright

Copyright © 2007 by ZyXEL Communications Corporation.
The contents of this publication may not be reproduced in any part or as a whole, transcribed, 
stored in a retrieval system, translated into any language, or transmitted in any form or by any 
means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or 
otherwise, without the prior written permission of ZyXEL Communications Corporation.
Published by ZyXEL Communications Corporation. All rights reserved.

Disclaimer

ZyXEL does not assume any liability arising out of the application or use of any products, or 
software described herein. Neither does it convey any license under its patent rights nor the 
patent rights of others. ZyXEL further reserves the right to make changes in any products 
described herein without notice. This publication is subject to change without notice.

Trademarks

ZyNOS (ZyXEL Network Operating System) is a registered trademark of ZyXEL 
Communications, Inc. Other trademarks mentioned in this publication are used for 
identification purposes only and may be properties of their respective owners.

Certifications

Federal Communications Commission (FCC) Interference Statement

This device complies with Part 15 of FCC rules. Operation is subject to the following two 
conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause 

undesired operations.

Содержание GS-2724





























































































































































































































































































































































Отзывы:

Нет отзывов