ZyXEL Communications ES-2108 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 284

ZyXEL Communications ES-2108 Скачать руководство пользователя страница 6

Safety Warnings

ES-2108 Series User’s Guide

6

Safety Warnings

1

For your safety, be sure to read and follow all warning notices and instructions.

• Do NOT use this product near water, for example, in a wet basement or near a swimming

pool.

• Do NOT expose your device to dampness, dust or corrosive liquids.

• Do NOT store things on the device.

• Do NOT install, use, or service this device during a thunderstorm. There is a remote risk

of electric shock from lightning.

• Connect ONLY suitable accessories to the device.

• Do NOT open the device or unit. Opening or removing covers can expose you to

dangerous high voltage points or other risks. ONLY qualified service personnel should
service or disassemble this device. Please contact your vendor for further information.

• Make sure to connect the cables to the correct ports.

• Place connecting cables carefully so that no one will step on them or stumble over them.

• Always disconnect all cables from this device before servicing or disassembling.

• Use ONLY an appropriate power adaptor or cord for your device. Connect it to the right

supply voltage (for example, 110V AC in North America or 230V AC in Europe).

• Do NOT allow anything to rest on the power adaptor or cord and do NOT place the

product where anyone can walk on the power adaptor or cord.

• Do NOT use the device if the power adaptor or cord is damaged as it might cause

electrocution.

• If the power adaptor or cord is damaged, remove it from the device and the power source.

• Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a

new one.

• Do not use the device outside, and make sure all the connections are indoors. There is a

remote risk of electric shock from lightning.

• The PoE (Power over Ethernet) devices that supply or receive power and their connected

Ethernet cables must all be completely indoors.

• Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your

device.

«
...
4
5
6
7
8
...
»

Содержание ES-2108





























































































































































































































































































Отзывы:

Нет отзывов