ZyXEL Communications ES-2108, Руководство пользователя, Страница: 58 / 284

Chapter 4 The Web Configurator
ES-2108 Series User’s Guide
58
5
Assigning minimum bandwidth to the CPU port. If you limit bandwidth to the CPU port,
you may find that the Switch performs sluggishly or not at all.
"
Be careful not to lock yourself and others out of the Switch.
4.6 Resetting the Switch
If you lock yourself (and others) from the Switch or forget the Switch password, you will need
to reload the factory-default configuration file or reset the Switch back to the factory defaults.
4.6.1 Reload the Factory-default Configuration File
Uploading the factory-default configuration file replaces the current configuration file with the
factory-default configuration file. This means that you will lose all previous configurations
and the speed of the console port will be reset to the default of 9600bps with 8 data bit, no
parity, one stop bit and flow control set to none. The password will also be reset to “1234” and
the IP address to 192.168.1.1.
To upload the factory-default configuration file, do the following:
1 Connect to the console port using a computer with terminal emulation software. See
Section 3.1.1 on page 43 for details.
2 Disconnect and reconnect the Switch’s power to begin a session. When you reconnect
the Switch’s power, you will see the initial screen.
3 When you see the message “
Press any key to enter Debug Mode within 3
seconds...
” press any key to enter debug mode.
4 Type
atlc
after the “
Enter Debug Mode
” message.
5
Wait for the “
Starting XMODEM upload
” message before activating XMODEM
upload on your terminal.
6
After the factory-default configuration file upload, type
atgo
to restart the Switch.