manualshive.com logo in svg

ZyXEL Communications ES-2024 Series, Руководство пользователя, Страница: 179 / 282

Поделиться
Скачать
ZyXEL Communications ES-2024 Series Скачать руководство пользователя страница 179

 Chapter 23 IP Source Guard

ES-2024 Series User’s Guide

179

The following table describes the labels in this screen.

23.5.2  ARP Inspection VLAN Configure

Use this screen to enable ARP inspection on each VLAN and to specify when the Switch 
generates log messages for receiving ARP packets from each VLAN. To open this screen, 
click 

Advanced Application > IP Source Guard > ARP Inspection > Configure > VLAN

.

Figure 101   

ARP Inspection VLAN Configure

The following table describes the labels in this screen.

Table 63   

ARP Inspection Port Configure

LABEL

DESCRIPTION

Port

This field displays the port number. If you configure the 

*

 port, the settings 

are applied to all of the ports.

Trusted State

Select whether this port is a trusted port (

Trusted

) or an untrusted port 

(

Untrusted

).

The Switch does not discard ARP packets on trusted ports for any reason.
The Switch discards ARP packets on untrusted ports if the sender’s 

information in the ARP packet does not match any of the current bindings.

Apply

Click 

Apply

 to save your changes to the Switch’s run-time memory. The 

Switch loses these changes if it is turned off or loses power, so use the 

Save

 link on the top navigation panel to save your changes to the non-

volatile memory when you are done configuring.

Cancel

Click this to reset the values in this screen to their last-saved values.

Table 64   

ARP Inspection VLAN Configure

LABEL

DESCRIPTION

VLAN

Use this section to specify the VLANs you want to manage in the section 

below.

Start VID

Enter the lowest VLAN ID you want to manage in the section below.

End VID

Enter the highest VLAN ID you want to manage in the section below.

Apply

Click this to display the specified range of VLANs in the section below.

VID

This field displays the VLAN ID of each VLAN in the range specified above. 

If you configure the 

*

 VLAN, the settings are applied to all VLANs.

Enabled

Select 

Yes

 to enable ARP inspection on the VLAN. Select 

No

 to disable 

ARP inspection on the VLAN.

Содержание ES-2024 Series



























































































































































































































































































Отзывы:

Нет отзывов