ZyXEL Communications ES-100, Руководство пользователя

Страница: 155 / 232

Chapter 20 MAC
MES-2110 User’s Guide
155
The following table describes the labels in this screen.
Table 58 Configuration > MAC Menu > MAC Filter Config
LABEL DESCRIPTION
MAC Filter Configuration
Status
Use this to determine whether to allow or deny traffic transmitted
from the source MAC address.
Port Select the port through which traffic from the source MAC address
is transmitted.
Priority Select a priority level from 0 to 7.
Pri-Override Use this to ignore the priority level assigned to the transmitted
frames.
MAC Address Type a MAC address in valid MAC address format, that is, six
hexadecimal character pairs.
Apply Click Apply to save your changes to the ZyXEL Device’s run-time
memory. The ZyXEL Device loses these changes if it is turned off
or loses power, so use the Save Settings link in the navigation
panel to save your changes to the non-volatile memory.
Allowed Table
Port
This is the port number through which traffic from the source MAC
address is transmitted.
MAC Address This is the source MAC address.
Priority This shows the priority level.
Pri-Override This shows whether priority level override is enabled or disabled.
Delete Click this to remove the rule.
Page Up/Down Click this to view the previous or next page.
Denied Table
Apply
Click Apply to save your changes to the ZyXEL Device’s run-time
memory. The ZyXEL Device loses these changes if it is turned off
or loses power, so use the Save Settings link in the navigation
panel to save your changes to the non-volatile memory.
MAC Address This is the source MAC address.
Delete Click this to remove the rule.
Page Up/Down Click this to view the previous or next page.