ZyXEL Communications Dimension ES-3024, Руководство пользователя, Страница: 90 / 212

Dimension ES-3024 Ethernet Switch
Filtering 9-3
Table 9-1 Filtering
LABEL DESCRIPTION
VID Type the VLAN group identification number.
The VID for the source and destination must be the same.
Port Select the port to which the filter rule should be applied. You may choose one port only
or all ports (
All Ports ).
Destination The next fields pertain to the destination MAC address and destination port.
Ignore Click this check box to ignore any traffic to all destination ports.
MAC Address Type a MAC address in valid MAC address format, that is, six hexadecimal character
pairs or click
Any MAC/VID to apply the filter rule to all MAC addresses and VLAN
groups.
VID Type the VLAN group identification number.
Port Select the port to which the filter rule should be applied. You may choose one port only
or all ports (
All Ports ).
Add Click Add to save the new rule to the switch. It then displays in the summary table at
the bottom of the screen.
Cancel Click Cancel to reset the fields to your previous configuration.
Clear Click Clear to clear the fields to the factory defaults.
9.3 Viewing and Editing Filter Rules
To view a summary of the rule configuration, scroll down to the summary table at the bottom of the Filtering
screen.
To change the settings of a rule, click a number in the Index field.
Figure 9-2 Filtering: Summary Table
The following table describes the labels in the summary table.