ZyXEL Communications Dimension ES-2008, Руководство пользователя

Страница: 105 / 168

Dimension ES-2008 Ethernet Switch
Switch Configuration 15-7
Follow the instructions in the table below to configure this screen.
Table 15-4 SMT: Add a VLAN Group
FIELD DESCRIPTION
VLAN Name Enter a descriptive name for the VLAN group for identification purposes.
VLAN ID Enter a number between 1 and 4049 as the identification number for the
VLAN group.
Port This read-only field displays the trunk group number or port numbers for
ports not belonging to a trunk group.
Note: This field is
0 to indicate that a port is in a trunk group.
Member Ports are assigned membership in a VLAN by associating a VLAN ID with
the ports
Press [SPACE BAR] to select
Tagged , UnTagged or No .
Select Tagged to tag all outgoing frames on this port.
Select Untagged not to tag all outgoing frames on this port.
Select No to prevent a port from joining a VLAN group
Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save>
and press [ENTER] to save the settings back to the switch.
15.3.3 Port-Based VLAN Configuration
Step 1. In the Configure VLAN Type screen and select Port-Based in the VLAN
Mode field.
Step 2. Press any key to display the screen as shown in Figure 15-6 . Follow the
instruction in Table 15-3 to set the fields in the Create a VLAN Group
screen.
15.3.4 Creating a New VLAN Group
You can add a new port-based or tag-based VLAN group.
Follow the steps below to create a new tag-based VLAN group.
Step 1. In the Configure VLAN Type screen, select Create a VLAN Group and
press [ENTER] to display the Create a VLAN Group screen as shown in
Figure 15-6 .
Step 2. Select Add a VLAN Group . Refer to Table 15-3 to set the fields.
15.3.5 Changing VLAN Group Settings
Follow the steps below to change VLAN group settings or delete a VLAN group.