ZyXEL Communications COMET 336, Руководство пользователя

Страница: 46 / 70

Status Registers & Result Codes 39
S32 - XON Character
Sets the value of the XON character.
S33 - XOFF Character
Sets the value of the XOFF character.
S38 - Delay Before Forced Hang Up
This register specifies the delay between the modem's receipt of the H command to
disconnect (or ON-to-OFF transition of DTR if the modem is programmed to follow the
signal), and the disconnect operation. Applicable to error-correction connection only.
This register can be used to ensure that data in the modem buffer is sent before the
modem disconnects.
1. If S38 is set to a value between 0 and 254, the modem will wait that number of
seconds for the remote modem to acknowledge all data in the modem buffer before
disconnecting. If time expires before all data is sent, the NO CARRIER result code will
be issued to indicate that data has been lost. If all data is transmitted prior to time-out,
the response to the H0 command will be OK.
2. If S38 is set to 255, the modem does not time-out and continues to attempt to deliver
data in the buffer until the connection is lost or the data is delivered.
Result Code Options
"ATXn" Result Code Option Table
The following table shows the different options available when setting the ATXn
command:
ATV0 ATV1 X0 X1 X2 X3 X4 X5 X6 X7
0 OK V V V V V V V V
1 CONNECT V V V V V @ $ #
2 RING ** V V V V V V V V
3 NO CARRIER V V V V V V V V
4 ERROR V V V V V V V V
5 CONNECT 1200 % % % % @ $ #
6 NO DIAL TONE V V V V V
7 BUSY V V V V V
8 NO ANSWER V V V V V
9 RINGING* V V V V V
10 CONNECT 2400 % % % % @ $ #
11 CONNECT 4800 % % % % @ $ #
12 CONNECT 9600 % % % % @ $ #
13 CONNECT 7200 % % % % @ $ #
14 CONNECT 12000 % % % % @ $ #
15 CONNECT 14400 % % % % @ $ #
16 CONNECT 19200 % % % % @ $ #