ZyXEL Communications COMET 336, Руководство пользователя

Страница: 40 / 70

AT Command Set Summaries 33
Command Options Function & Description Ref.
&Sn Data Set Ready (DSR) function selection.
&S0 * DSR overridden, DSR always ON.
&S1 DSR set ready
&Tn Modem testing.
&T0 Terminate test in progress.
&T1 Initiate Analog Loop-back (ALB) test.
&T3 Initiate Local Digital Loop-back (LDL) test
&T4 Grant Remote Digital Loop-back request from remote
modem
&T5 Deny Remote Digital Loop-back request from remote
modem
&T6 Initiate Remote Digital Loop-back (RDL) test
&T7 Initiate Remote Digital Loop-back with self test
(RDL+ST)
&T8 Initiate Analog Loop-back with self test. (ALB+ST)
&Vn View profile settings.
&V0 View current active settings.
&Vn View the (n-1) user profile settings (n=1-2)
&V3 View the factory settings
&Wn n=0-1 Write current settings to user profile n in non-volatile
RAM.
&Xn Synchronous mode timing (clock) source selection
&X0 * Modem provides synchronous transmit clock signal
(Internal clock to pin 15 of EIA-232D)
&X1 Terminal provides synchronous transmit clock signal
(External clock from pin 24 of EIA-232D)
&X2 Received carrier provides synchronous transmit clock
signal (Remote or Slave clock to pin 15 of EIA-232D)
&Yn Break handling. Destructive Break clears the buffer.
Expedited Break is sent immediately to the remote
system.
&Y0 Destructive, expedited.
&Y1 * Nondestructive, expedited.
&Y2 Nondestructive, unexpedited.
&Z? Display all the phone numbers stored in non-volatile
RAM.
&Zn=s n=0-3 Write phone number/s to NVRAM at location n (n=0-3)
use AT*Dn to set the default dial pointer.
Extended AT* Command Set
Command Options Function & Description Ref.
*Dn n=0-3 Set default dial pointer at telephone directory location n. S29
*En Modem error control negotiation. S21.0
*E0 * if error control negotiation fails, keep the non-error
control connection.
*E1 If error control negotiation fails, disconnect the call