ZyXEL Communications CellPipe 7130 RG, Руководство пользователя

Страница: 232 / 404

Chapter 16 Quality of Service (QoS)
CellPipe 7130 RG User’s Guide
232
16.6.1 Policer Setup Edit
Click the Add button or the Edit icon in the Policer Setup screen to configure a
classifier.
Figure 93 Add/Edit Policer Setup
The following table describes the labels in this screen.
Table 74 Add/Edit Policer Setup
LABEL DESCRIPTION
Active Select the check box to enable the policy.
Name Enter a descriptive name of up to 15 printable English keyboard
characters, including spaces.
Meter Type This is set to Simple Token Bucket, which uses tokens in a bucket to
control when traffic can be transmitted. The bucket is a buffer that
temporarily stores outgoing packets and transmits them at an average
rate.
Committed
Rate
Enter the maximum committed rate for the class/es.
Committed
Burst Size
Enter the the maximum committed burst size for the class/es.
Available Class This shows all the classes created in the CellPipe 7130 RG. Select the
class that you want to include in the policy and click Add to move it to
selected class.
Selected Class This shows to which classes the policy applies. Select the class that
you want to exclude from the policy and click Remove to move it to
the available class.
Add/Remove Use these buttons to add or remove a class from either Available Class
and Selected Class boxes.