ENGLISH
7
E THE CAMERA
E THE CAMERA
E THE CAMERA
Lights
The camera turns on.
• The rear panel
Power
light comes on.
• The
Link
light starts flashing green if the Ethernet
cable is properly connected. The camera is ready for
use now.
If the
Power
light does not turn on, make sure the
cables are connected properly and that the power
source is turned on. If the lights still do not turn on,
please contact your camera vendor.
Configure the Camera
The camera receives an IP address automatically
(DHCP mode) by default. You can use the
IPCam
Discovery
Utility
to find the camera in the network.
The camera uses IP address 192.168.1.100 if it can't
get an IP address automatically.
Supported Operating Systems
• Windows XP, Windows Vista or Windows 7
Содержание CAM5525
