8
Chapter 2
Hardware and Software Installation
Installing the camera stand
The camera is designed with a camera stand hook-up located on the back panel.
Install the camera to the camera stand by screwing the swivel base to the hook-up,
and then you can mount the camera stand on the wall (or ceiling) through the two
screw holes*.
To mount the camera to a wall, unscrew the base of the camera and remove the metal
plate. With the included screws and anchors, fasten the base (Fig1) onto the wall with
screw, and then cover base with the base shell (Fig2) cover, finally will twist camera
tightly on the wall.
*
The screw kit is included in the package
Note:
To mount the camera on the wall (or ceiling) securely, it is recommended to use
the plastic wall anchors and screws.
