ZyXEL Communications ALC1224, Руководство пользователя

Страница: 101 / 136

ALC1224 User’s Guide
Commands 10-5
Table 10-1 Standard Shell Commands
COMMANDS DESCRIPTION
lineperf <port> This command shows the line quality of the
specified DSL port.
loopback <port> <local | f5> Performs loopback test. <mode> = "local" or
"f5"
list port <port> Displays line settings.
list ports Displays line settings on all ports.
stat ch <port> Displays channel status of a DSL line.
stat chs <port> Displays channel status of all DSL lines.
linedata <port> Displays the line data load per symbol
(tone).
linerate <port> Displays the line rate.
show port <port> Displays the line status (either up or down)
of a port.
show ports Displays the line status (either up or down)
of all ports.
10.4 Engineer Shell Commands
The following table lists engineer shell commands that you can use with the line card when you use the
management switch card.
Table 10-2 Engineer Shell Commands
COMMANDS DESCRIPTION
config
save This command saves configuration
information in all modules to nonvolatile
memory.
lcman
status Shows the status of the line card manager.
svlan setentry <vid> <slot-
port> [<adv> <tag>]
Sets a VLAN entry.
delentry <vid> Deletes a VLAN entry.
list [<vid> | <startVID>
<endVID>]
Displays VLAN settings.
active <vid> Turns on VLAN.
deactive <vid> Turns off VLAN.
name set <vid> <name> Sets a name for a VLAN entry.
name list Displays the names of the VLAN entries.
port enable <slot-port> Turns on a subscriber port.
disable <slot-port> Turns off a subscriber port.