manualshive.com logo in svg

ZyXEL Communications ADSL2+ 4-port Gateway P-660H-D Series, Руководство пользователя

Продукт ZyXEL Communications ADSL2+ 4-port Gateway P-660H-D Series предоставляет быстрое и надежное подключение к Интернету. Здесь вы можете загрузить бесплатный брошюру & характеристики продукта, а также инструкцию по эксплуатации. Загрузите их с manualshive.com. (Translated: The ZyXEL Communications ADSL2+ 4-port Gateway P-660H-D Series product provides fast and reliable internet connection. Here you can download a free brochure & specs of the product, as well as the user manual. Download them from manualshive.com.)

Поделиться
Скачать
background image

P-660R-T Series User’s Guide

61 

Chapter 5 LAN Setup

5.4.4  Multicast

Traditionally, IP packets are transmitted in one of either two ways - Unicast (1 sender - 1 
recipient) or Broadcast (1 sender - everybody on the network). Multicast delivers IP packets to 
a group of hosts on the network - not everybody and not just 1. 

IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish 
membership in a Multicast group - it is not used to carry user data. IGMP version 2 (RFC 
2236) is an improvement over version 1 (RFC 1112) but IGMP version 1 is still in wide use. If 
you would like to read more detailed information about interoperability between IGMP 
version 2 and version 1, please see sections 4 and 5 of RFC 2236. The class D IP address is 
used to identify host groups and can be in the range 224.0.0.0 to 239.255.255.255. The address 
224.0.0.0 is not assigned to any group and is used by IP multicast computers. The address 
224.0.0.1 is used for query messages and is assigned to the permanent group of all IP hosts 
(including gateways). All hosts must join the 224.0.0.1 group in order to participate in IGMP. 
The address 224.0.0.2 is assigned to the multicast routers group. 

The Prestige supports both IGMP version 1 (

IGMP-v1

) and IGMP version 2 (

IGMP-v2

). At 

start up, the Prestige queries all directly connected networks to gather group membership. 
After that, the Prestige periodically updates this information. IP multicasting can be enabled/
disabled on the Prestige LAN and/or WAN interfaces in the web configurator (

LAN

;

 WAN

). 

Select 

None

 to disable IP multicasting on these interfaces.

5.5  Any IP

Traditionally, you must set the IP addresses and the subnet masks of a computer and the 
Prestige to be in the same subnet to allow the computer to access the Internet (through the 
Prestige). In cases where your computer is required to use a static IP address in another 
network, you may need to manually configure the network settings of the computer every time 
you want to access the Internet via the Prestige. 

With the Any IP feature and NAT enabled, the Prestige allows a computer to access the 
Internet without changing the network settings (such as IP address and subnet mask) of the 
computer, when the IP addresses of the computer and the Prestige are not in the same subnet.  
Whether a computer is set to use a dynamic or static (fixed) IP address, you can simply 
connect the computer to the Prestige and access the Internet. 

The following figure depicts a scenario where a computer is set to use a static private IP 
address in the corporate environment. In a residential house where a Prestige is installed, you 
can still use the computer to access the Internet without changing the network settings, even 
when the IP addresses of the computer and the Prestige are not in the same subnet.

Содержание ADSL2+ 4-port Gateway P-660H-D Series















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ADSL2+ 4-port Gateway P-660H-D Series

WELLTECH FXO - RECORD NEW GREETING Manual preview
FXO - RECORD NEW GREETING
Бренд: WELLTECH Страницы: 2
Pace Telkom 921VNX User Manual preview
Telkom 921VNX
Бренд: Pace Страницы: 36
AXIOMTEK UST200-83H-FL User Manual preview
UST200-83H-FL
Бренд: AXIOMTEK Страницы: 57
DoorKing 1837 Owner'S Manual preview
1837
Бренд: DoorKing Страницы: 72
DAE CC2030 Installation Manual preview
CC2030
Бренд: DAE Страницы: 2
EAE DA110 Product Manual preview
DA110
Бренд: EAE Страницы: 22
Parker PVSG-IQAN-C2E1M2W1U1 User Manual preview
PVSG-IQAN-C2E1M2W1U1
Бренд: Parker Страницы: 70
Fujitsu GW1500 Getting Started Manual preview
GW1500
Бренд: Fujitsu Страницы: 46
Fujitsu BACnet UTY-VBGX Instruction Manual preview
BACnet UTY-VBGX
Бренд: Fujitsu Страницы: 103
Fujitsu UTY-VBGX Instruction Manual preview
UTY-VBGX
Бренд: Fujitsu Страницы: 159
Omron KOSMOS Hardware Setup Manual preview
KOSMOS
Бренд: Omron Страницы: 11
Omron PRT1-SCU11 Operation Manual preview
PRT1-SCU11
Бренд: Omron Страницы: 78
Hitron CODA D3.1 Quick Start Manual preview
CODA D3.1
Бренд: Hitron Страницы: 2
Planet WPG-120 User Manual preview
WPG-120
Бренд: Planet Страницы: 30
TEKTELIC Communications KONA ENTERPRISE T0007242 User Manual preview
KONA ENTERPRISE T0007242
Бренд: TEKTELIC Communications Страницы: 15
PR Elecronics 4801 Installation And Connection Manual preview
4801
Бренд: PR Elecronics Страницы: 24
Ness G1 Camera Setup preview
G1
Бренд: Ness Страницы: 7
Bang & Olufsen BeoLink 1703 Installation Manual preview
BeoLink 1703
Бренд: Bang & Olufsen Страницы: 62

Бренды по названию

Популярные бренды

Загрузить еще бренды