ZyXEL Communications AAM1212-51, Руководство пользователя

Страница: 284 / 435

AAM1212-51/53 Series User’s Guide
284 Chapter 43 Alarm Commands
43.9 Alarm History Clear Command
Syntax:
ras> alarm history clear [<alarm>|all <condition>|all] <severity>
This command removes historic alarm entries by alarm category, alarm condition or severity.
The following example removes the historic minor level alarms for all alarm categories, and
all conditions.
43.10 Alarm XEdit Command
Syntax:
ras> alarm xedit <alarm>|all <cond>|<condcode> <severity> <fac>
<target>[,<target>] [clearable]
where
This command sets the severity level of an alarm(s) and where the system is to send the
alarm(s).
Figure 145 Alarm History Clear Command Example
ras> alarm history clear minor
<cond> =
all|condition
This is the text description for the condition
under which the alarm applies. Use the
alarm tablelist
to
find alarm conditions.
<condcode > =
The condition code is the number of a specific alarm message.
Use the
alarm tablelist
to find alarm condition codes.
<severity> =
Specify an alarm severity level (critical, major, minor or info)
for this alarm. Critical alarms are the most severe, major alarms
are the second most severe, minor alarms are the third most
severe and info alarms are the least severe.
<fac> =
The log facility (
local1~local7
) has the device log the
syslog messages to a particular file in the syslog server. Set this
if this entry is for sending alarms to a syslog server. See your
syslog program’s documentation for details.
<target> = snmp|syslog|all
The type of alarm messages that the device
is to send (SNMP, syslog or all). You can specify more than one
separated by commas.
[clearable] =
clearable|unclearable
This sets whether or not the alarm
clear command removes the alarm from the system.