Using Hydrogen Generator With Bottled Water
This is a useful function for traveling or outdoors where you do not have access
to clean water. The hydrogen generator can be used to generate hydrogen
directly into bottled water.
1. Fits bottles with cap size 1.2 inches (30 mm) in diameter.
2. Make sure the fit is good before operating the device.
3. Leave 1-inch (about 3 cm) of air space inside bottle for hydrogen gas to expand.
4. Cover the membrane with the silicone cap after use.
Step 1
1. Unscrew bottled water cap
2. Hold bottle upright
3. Attach the hydrogen generator by
turning it clockwise
Step 2
1. Turn bottle/hydrogen generator over
2. Check for leaks
3. Operate hydrogen generator normally
