The delicate SPE membrane needs to be moist at all times for optimum
hydrogen production.
Thus the hydrogen bottle is shipped with some
water in the generator beneath the silicone cap
.
DO NOT pour boiling water, carbonated drinks, alcohol, tea, coffee or
water above 140°F (60°C) into the bottle as it will cause damage to the
membrane.
IMPORTANT INFORMATION:
Before First Use
Remove the orange silicone plug.
Fill the bottle with water and let it soak for 30 mins to moisten the SPE
membrane.
If the membrane has completely dried up during transit
please let it soak for 24 hours
. (NOTE: It takes about 2 weeks for
hydrogen generation to reach full production potential)
Pour water away and rinse with clean water.
Fully charge hydrogen device using USB cable provided.
To Operate
1. Fill bottle with clean drinking water. (For highest hydrogen concentration fill
to the top of the bottle just below the pressure relief vent).
2. Press and hold the power button for 2 secs to activate hydrogen production.
Device will stop automatically after 5 mins followed by 3 beeps to alert you that
hydrogen production is complete.
3. Drink it as soon as possible. Dissolved hydrogen dissipates quickly.
4. During hydrogen generation, if for some reason you need to turn it off before
the cycle ends, simply hold the power button for 3 secs. (This step is not
required for normal operation)
NOTE
:
This device operates at high pressure. DO NOT activate more than
twice continuously as extreme pressure buildup will damage the
membrane and electrolytic cell.
