ZP302 User Manual
17
When you make secondary dial in off-hook/handsfree/standby pre-input mode, press
key to postpone input, and screen display will show--. One --stands for 2
seconds. For example, you input 123--45, the phone will send DTMF(45) 2 seconds
after the phone call 123. 123------45 will make phone send DTMF(45) at 6 seconds
interval.
MWI(Message Waiting Indication)
When a new voicemail coming, LED on the phone will flash. You can press the
MWI
key to listen new voicemail if you configure mwi number
3.2.2. Call pickup
Call pickup is implemented by simulating pickup function of PBX. it’s that, when A calls B, B
rings but no answer, at this moment, C can hook off and input an appointed prefix plus B’s
number, pick up A’s call and talk with A
The following chart shows how to configure an appointed prefix in dial peer to have call pick up
function.
*1* means appointed prefix code. After making the above configuration, C can dial *1* plus
B’phone number to pick up A’s call. User can set prefix in random, in the case of no affecting
current dialing rules.
3.2.3. join call
When B is calling C, A can join in the existing call by inputing an appointed prefix numbers plus
B or C number, if B or C also supports join call
The following chart shows how to configure an appointed prefix in dialpeer to have join call
function.
*2* means appointed prefix code. After making the above configuration, A can dial *2* plus B
or C number to join B and C’s call, . User can set prefix in random, in the case of no affecting
current dialing rules.
3.2.4. redial/unredial
If B is in busy line when A calls B, A will get notice: busy, please hang up. If A want to connect B
as soon as B is in idle, he can use redial function at the moment and he can dials an appointed
prefix number plus B’s number to realize redial function.
What is redial function? A can’t not build a call with B when B is in busy ,then A will subscribe
