Zycoo IAS-L100, Руководство пользователя

Страница: 16 / 36

IP Audio Center User Guide | ZYCOO Co., Ltd.
14
•
Active Push: When the camera and the intercom device are in the internal network (behind NAT),
then the intercom device can be pushed the video stream from the video camera to the server. (Note:
no need to turn on this option if the server and the video camera are in the same network).
•
Video Terminal: Select the video terminal linked with the intercom device (Note: When all devices
are in the same network and the Active Push option is ON, it can be only linked with one video
terminal. Otherwise, it can link with multiple video terminals).
•
Allow Live PA: Allow this device to be called for live SIP paging.
•
Contact: The contact person who is responsible to maintain this device.
•
Phone: The phone number if the contact person.
•
Location: The location that shows this device’s whereabouts.
Camera Info
•
Type: The device type, can be modified.
•
Label: Label is an additional property of the IP audio devices. It will be used by the IP Audio Dispatch
Console to filter IP audio devices in a group with the same label.
•
Name: A user defined name to identify this device.
•
Remarks: Additional information can be added.
•
RTSP address: the RTSP address that the video terminal will be used.
•
Allow Live PA: Allow this device to be called for live SIP paging.
•
Contact: The contact person who is responsible to maintain this device.
•
Phone: The phone number if the contact person.
•
Location: The location that shows this device’s whereabouts.
Setup Paging Groups
After you have registered all IP audio endpoints to the IP Audio Center, next step you have to group
them. A group can be the IP audio devices of a specific area or a same type of IP audio devices.
By grouping the IP audio devices, you can achieve group (zone) -based SIP paging, music, notification,
etc.
To create paging groups, please go to Audio Devices -> Groups screen. Click on Add button to create
a group.