Zycoo CooVox U80, Быстрое руководство по установке

Страница: 8 / 18

08
Module Combination Table
Slot1 Slot2 Feasibility
E1 Module
4BRI Module
FXO/FXS Module
GSM/WCDMA Module
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
Below are the rules must follow to install ZYCOO module cards.
1.Please refer to module combination table to install the
module/modules to the module slots, you must follow the feasible
combinations or there will be problems.
2.Check if the module is clean and intact.
3.Please ensure power of IP PBX is cut off.
4.Please ensure the direction of the module is correct (ZYCOO-logo
side up).
5.Push the module into the module slot through the guide rail.
6.Tighten the locking screws on the both ends of the module
Vacant
FXO/FXS Module
GSM/WCDMA
E1 Module
4BRI Module
Vacant
E1 Module
4BRI Module
FXO/FXS Module
GSM/WCDMA Module
E1 Module
4BRI Module
FXO/FXS Module
GSM/WCDMA Module
E1 Module
4BRI Module
FXO/FXS Module
GSM/WCDMA Module
E1 Module
4BRI Module
FXO/FXS Module
GSM/WCDMA Module
E1 Module
4BRI Module
FXO/FXS Module
GSM/WCDMA Module