ZyCast
SG-289 User’s Manual v1.1
7
4,
Bluetooth/Backlight usage
(The default of Bluetooth/Backlight is ON.)
1. Under normal operation status, press button “A” for 1 second and then release to turn
off/on Backlight.
2. Under normal operation status, press button “B” for 1 second and then release to turn
off/on Bluetooth.
L
Under Recorder USER mode, the Bluetooth ON/OFF setting function will be
disabled. If you want to turn on/off Bluetooth under USER mode, please use
Bluetooth setup described in 5. Display Setup below.
5,
Display Setup
(Please refer to Appendix: Time Zone Table for time zone adjustment.)
1. Press button “A” for 2 seconds then release to enter into setup menu.
2. Press “Select” for 1 second to increase the parameter figure.
3. Press “Next” for 1 second to select different parameters.
4. After finishing setup, press “Exit” for 1 second to back to operation status.
L
Whenever setting up, the power of the device must be turned off then on again to
reactivate the signal.
