ZG1163R CO
2
and Temperature Monitor Operating Instructions
Product Overview
Thank you for selecting ZG1163R desktop CO
2
monitor, ZG1163R CO
2
monitor is smart, compact and easy-to-use. In addition to measuring the CO
2
concentration, ZG1163R can also measure the ambient temperature and the relative humidity. This product is developed to detect the presence of CO
2
in
ambient air and help people to take care of Indoor Air Quality. ZG1163R can be widely used in the office building, school, exhibition, shopping mall, meeting
room, fitness center, restaurant and other pubic place where personal comfort, healthy is important.
Features:
□
V The built-in Data logger can store 48 sets of CO
2
and temperature and RH in the past 24 hours; one log per 30 minutes.
□
V Max/Min mode can record the maximum and minimum concentration of CO
2
since the device has been last turned on.
□
V The Alarm mode the Alarm Level can be adjustable by user.
□
V The RCFS Mode can recover the original factory settings after the CO
2
device has been recalibrated, altered, or damaged.
Mode Functions
There are several Modes which can be adjusted by user. These modes are
Mute Mode, ALTI Mode, ALARM 1 Mode, ALARM 2 Mode, OUTSIDE Mode, CALI Mode,
LOG Mode, MaxMin Mode and RcFS Mode in sequence.
MUTE
The beep alarm can be setting
on/off under Mute Mode
ALTI
Compensate the pressure
changes with appropriate
altitude of location when
measure
ALARM 1
The first alarm level can be
adjusted by user
ALARM 2
The second alarm level can be
adjusted by user
OUTSIDE
Modify the outside CO
2
concentration for calculating
the ventilation rate
CALI
Calibrate the sensor while the
reading deviates from the
actual CO
2
concentration
LOG
Show the past CO
2
,
Temperature and RH records in
the past 24 hours
MaxMin
Show the Max and Min CO
2
reading before being cleared or
after Power On
RcFS
Recover the factory setting to
cancel customize setting
Safety Instructions
Warning: Your safety is very important to us .To ensure to use the product correctly and safely, we would like to draw your attention to read the warning and entire User Manual
before using the product. These are important safety information and should be observed at all times.
1. Please handle the devices lightly, do not subject the product to impact or shock. Otherwise, this may cause the accuracy drift.
2. Do not immerse the product in water. Water can cause electric shock, fire or malfunction which may result in damage.
3. Do not keep the product under the hot and moisture environment. Keep the product away form the heat source or near water.
4. Please use only the included power adaptor. Improper power adaptor or power sources can cause serious damage to the product, or result in injury or death to the user.
Caring for product
To ensure you receive the maximum benefit from using this product, please observe the follow guidelines.
1. Cleaning— Disconnect the power before clean. Use a damp cloth, do not use the liquid cleaning agent, such as benzene, thinner or aerosols.
2. Repair----Do not attempt to repair the product or modify the circuitry by yourself. Please contact with the local dealer or a qualified repairman if the product needs servicing.
1.Enter Button
4. Mode Button
7. Yellow LED Display (800-1200ppm)
10. Power inlet
2. Down Button
5. LCD display
8. Red LED Display (>1200ppm)
11. RJ45 socket (only for factory use)
3. Up Button
6.Green LED Display (<800ppm)
9.Gas Entry Hole
12. Ventilation Slots
(Display features and modes)
