Zwilling ENFINIGY 53000, Руководство по эксплуатации

Страница: 27 / 144

27 www.zwilling.com
GB
Problem Possible cause Remedy
The appliance switches off,
display shows
E2
Very big amounts of ingredi-
ents of very hard consistency
block the blades.
Remove the blender bowl, loos-
en contents, possibly reduce
their amount (
Caution:
Risk of
injury with the blades). Reinstall
blender bowl and resume
blending.
The appliance switches off,
display shows
E3
or
E4
Motor is overheated. Venti-
lation openings on the lower
side are blocked. Unblock ventilation openings,
let appliance cool down for 1
hour and resume blending.
Motor is overheated. The
blender has been strained to
long and to heavily.
If necessary reduce the amount
of contents, let appliance cool
down for 1 hour and resume
blending.
The mixed product contains
many ingredient pieces.
The power button was not
pressed and held for long
enough in the multi-function
program.
Press and hold the power button
until the desired consistency is
reached.
The mixing speed is too low or
the mixing duration too short if
you have selected the mixing
speed yourself.
If you have selected the mixing
speed yourself, turn the selec-
tor switch further to the right to
increase the mixing speed, or ex-
tend the mixing process until the
desired consistency is reached.
The ingredients are not suitable
for the selected automatic
program to be used.
Finish mixing the mixed product
with the multi-function program
until the desired consistency is
achieved.
The appliance switches off
immediately.
The power button was not
pressed and held in the mul-
ti-function program.
Press and hold the power button.
Fault
Fault