ZuumMedia MAHCL4X4, Руководство пользователя

Страница: 11 / 20

9
IR RX SETTING: (Default IR TX: O O O O)
This option is used to setup whether the IR signal will be sent to MATRIX from remote devices to control local
source equipment. IR from the receiver connected to HDBaseT 1~4, to control a local source, setting should
be O for on and X is for off.
After entering the IR RX SETTING menu, press ENTER, then the bottom line of text will start to flash, press
the UP or DOWN button to select O or X, then press ENTER to confirm setting.
HDBaseT IR ID: (Default IR ID: 5 5 5 5)