14
12. Network Button
Step1:
Make sure the connection status is on connected status “
”
Step2:
Connect matrix to network through IP control port
Step3:
Click “NETWORK” Button
and then will be a pop-up windows
Step4:
Click “Read From Device” to read the device IP address
Step5:
Select “Ethernet” button and then will be a pop-up windows
Step6:
Key in the device IP address to the pop-up windows and click OK
Step7:
Click the Connect Button
“
”
to connect then you start control by Ethernet
*Remark: Switch controlling by clicking the shortcut button
RS-232 Button:
Click the button and then click “Connect Button” to start
Ethernet Button:
Click the button and then click “Connect Button” to start
