10
Step4:
Make sure the connection status is on connected status “
”
3. FW/SW Version Button
Click
“
”
button to show version information
4. RS-232 Button
1) Click
“
”
button to switch to RS-232 function.
2) If RS-232 is connected, the button will show the sign image to let you know.
5. Ethernet Button
1) Click
“
”
button to switch to Ethernet function
2) If Ethernet is connected, the button will show the sign image to let you know.
6. COM Port Selection
Click
“
”
button to select COM Port
7. Connection Status
1) Connected Status:
2) Connecting Status:
3) Disconnected Status:
8. Connect/Disconnect Button
Click this button
“
”
to change connection status
