Digital Video Recorder User Manual
54
Chapter 6 Remote Surveillance
6.1 IE Remote Surveillance
In order to view the DVR from network, it must be connected to a LAN/WAN or
Internet. The following introduces the connection and use of Internet. Remote access to
the Internet has two types according to their online behavior.
6.1.1 On LAN
Step1:
Right-click "My Network Places" to pop-up a drop-down menu, then click
"Properties" to open the "Network connection".
Step2:
Double-click
³
Local Area Connection ", then click "Properties" button.
Step3:
Double-click "Internet Protocol (TCP / IP)
´
.
Step4:
Obtain IP address, subnet mask and gateway of local computer.
Step5:
Set the IP address, subnet mask and gateway of DVR.
(QWHULQWRWKH'95¶V0DLQ
Menu
Æ
Setup
Æ
Network configuration to enter IP address,
subnet mask and gateway. Subnet mask and gateway must be same as the parameters of
³
Internet Protocol
´
, and IP address should be in the same field as your computer.
E.g. if your computer is 192.168.1.8, then the IP address of DVR can be 192.168.1.X
(
³
X
´
is an arbitrary integer between 0 and 255 in addition to 8 and 1), subnet mask is
255.255.255.0, and gateway is 192. 168. 1. 1.
Step6:
After finish the above settings, input the IP address of DVR in browser
address bar to enter
the login page
,
such as: 192.168.1.X. The network will download
control automatically (the settings of browser must allow to download control, refer to
Appendix -1).
Step7:
After the download is complete, interface will pop up a login window.
