Digital Video Recorder User Manual
2
Chapter 3 Basic Function Instruction
3.1 Power On/Off
3.1.1 Power On
Before you power on the unit, please make sure all the connection is good.
Step1:
connect with the source power; switch on the power button near the power
port in the rear panel.
Step2:
the device will be loaded, and the power indicator will display red.
Step3:
a WIZARD window will be pop-up and show some information about device
name, language, date and time, network, record, etc.
User can setup here and refer to the setup steps from the corresponding chapters. If
XVHUVGRQ¶WZDQWWRVHWXS:L]DUGS
lease click Exit button and enter into the login interface.
Notice: This
series can only display menu on VGA monitor, BNC monitor or
HDMI monitor at the same time. After the device power on,
if there is live image
display without menu display, please check up whether other device has menu
display firstly, or long press Exit /ESC button to switch the output among BNC,
HDMI and VGA.
3.1.2 Power Off
User can power off the device by using remote controller, keyboard and mouse
¾
By remote controller:
Step1:
press Power button of remote controller to pop up Shut Down window.
Step2:
click OK, the unit will power off after a while.
Step3:
disconnect the power.
¾
By mouse:
Step1:
enter into Main Menu and select Shut Down button to pop up Shut Down
