FV658 Rev. A 7/27/2018
Page 12
Shroud Installation:
•
Place shroud on hanger hooks of wall bracket as shown. Then, insert each clevis pin through the 2 pivot points. (Note: the
shroud will likely need to be rotated upward slightly in order to install each pivot.
•
After one pivot is installed, retain clevis pins with the included cotter pins.
Step 5
•
Rotate the shroud up to the basin until the threaded hole in the L-bracket in visible through the slot in the shroud. Then, install
the screw shown, and repeat for the other side.
Step 4
18
19
12
12
