FV740 Rev. C 04/06/21
Page 3
2. Install spout to sink using spout base gasket, plastic mounting
washer, star washer and mounting nut.
Note: Faucet location needs to be within 3 feet radius above
electrical outlet for ACA configurations.
NOTE
: Before installation, turn off water supplies to existing faucet and remove faucet if replacing an existing device.
Clean the faucet basin and clear away debris. Flush all supply lines before connecting the faucet. Failure to do so
may result in debris clogging the inlets and/or internal control and mixing valve
1. Carefully screw aerator into spout using included tool.
Take care to not pinch blue o-ring
3. Ensure that slot in plastic washer is facing forward.
Sensor cable should not pass through plastic mounting washer.
Spout Installation Instructions
Z6913-XL-W1
Z6915-XL-W1
Cover Plate Installation Instructions
1. (For faucets with -CP4 or -CP8 suffix).
Remove adhesive backing from gasket and then pass sensor
connector wire and shank through gasket. Align gasket with
faucet bottom and press firmly together. Pass sensor connector
and shank through cover plate and fasten to the faucet with the
provided screws.
Содержание plumbSMART AquaSense Z6913-XL-W1
Страница 2: ...This Page Intentionally Left Blank ...
Страница 15: ...This Page Intentionally Left Blank ...