FV1116 Rev. C 7/19/18
Page 3
8
5.)
Determine the length of the vacuum breaker tube
(F)
required to join the flush valve and fixture spud. Cut the
vacuum breaker tube, if required, to this length. Assemble
the vacuum breaker tube assembly and spud nut assembly
to the flush valve and fixture spud.
5
F
8.)
Determine all flush valve connections are tight and
proceed to open control stop.
D
H
G
Vacuum
Breaker
Tube Nut
Spud Nut
Slip Gasket
Rubber
Gasket
Spud
Escutcheon
6.)
Hand tighten spud nut
(G)
to the fixture and vacuum breaker
tube nut
(H)
to flush valve. Adjust the valve assembly for
plumb. Tighten fixture spud nut
(G)
, vacuum breaker tube
nut
(H)
and lock nut
(D)
(fig. 5) with a wrench.
6
7
7.)
Attach the appropriate handle/actuator to the valve body.
ZER
ZEMS-IS
ZEMS
Z
