Zurich ZR11, Руководство пользователя, Страница: 71 / 96

Additional Tests
BATTERY/ALTERNATOR MONITOR
69
„ An “instructional” message shows
on the Code Reader’s display,
showing the procedures to prepare
the vehicle for the battery check.
4. Prepare the vehicle for the battery check:
„ Turn the engine off.
„ Place the transmission in PARK or
NEUTRAL, and set the parking
brake.
„ Make a visual check of the battery’s condition. If the battery
terminals are corroded or other damage is present, clean or
replace the battery as appropriate.
„ For “unsealed” batteries, make sure the water level in each cell
is above the battery plates.
„
Turn the ignition on. DO NOT start
the engine.
5. Press the ENTER button to begin
the battery check.
If the engine is running, an
advisory message shows on
the Code Reader’s display.
Turn the engine off, then turn
the ignition on.
DO NOT start
the engine. Press the ENTER
button to continue.
„ An “instructional” message shows
on the Code Reader’s display.
6. Turn the vehicle’s headlights on, the
press the
ENTER button to continue.
„ A “countdown” message shows on
the Code Reader’s display while the
battery check is in process.
„ If battery voltage is less than 12.1
volts, an advisory message shows
on the Code Reader’s display.
Press the
M button to return to the
Main Menu. Turn the ignition off and
disconnect the Code Reader from
the vehicle. Fully charge the battery,
then repeat the battery check.
„ If battery voltage is greater than
12.1 volts, an “instructional”
message shows on the Code
Reader’s display.
7. Turn the vehicle’s headlights off, the
press the
ENTER button to continue.