Zurich ZR11, Руководство пользователя, Страница: 49 / 96

Using the Code Reader
ERASING DIAGNOSTIC TROUBLE CODES (DTCs)
47
„ To erase OBD2 DTCs: Wait until the codes are displayed on
the Code Reader’s LCD and then proceed to step 3.
„
To erase enhanced or ABS DTCs: Press the SYSTEM MENU
button to display the System Menu. Use the UP and
DOWN buttons, as necessary, to highlight the desired option,
then press the ENTER button. Perform the appropriate Code
Retrieval procedure (see page 16 for more information) and then
proceed to step 3.
3. Press and release the ERASE
button. A confirmation message shows
on the LCD display.
„ If you are sure you want to proceed,
use the
UP and DOWN
buttons, as necessary, to highlight
Yes , then press the ENTER
button to continue.
„
If you do not want to proceed, use
the
UP and DOWN buttons,
as necessary, to highlight No , then
press the ENTER button to
cancel the erase procedure.
4. If you chose to erase DTCs, a “One
moment please…” message displays
while the erase function is in progress.
If the vehicle’s engine is running,
an advisory message shows on
the Code Reader’s display. Turn
the engine OFF, then turn the
ignition back to ON. DO NOT start
the engine. Press the
ENTER
button to continue.
„
If the erase was successful, a
confirmation message shows on the
display. Press the
SYSTEM MENU
button to return to the System
Menu.
If the erase was not successful
and ECU error code $22 is
present, an advisory message
displays. Start the engine and
maintain vehicle speed at 0, then
press the
ERASE button to
try again.